Showing 1400–1410 of 10070 results

VTB Series light blocking vent panels provide a high percentage of open area (64%) and pre-installed light blocking material to provide superior ventilation while blocking view of internal wiring.

We designed the broadcast standard 22” wide VRK specifically for mounting video and AV equipment. Built-in horizontal lacing bars are ideal for quick tie-and-slide lacing of video cable bundles. Choose a VRK for a strong, narrow enclosure with seismic certification and open or removable sides.

#NAME?

The DWR Series Wall Racks are now Forward and Lever Lock™ compatible providing maximum mounting capacity on and off the rail and a suite of tool-free accessories making rack installations 5Xs faster!

"EIA compliant 19” wall mount rack shall be Middle Atlantic Products model # DWR-18-22. Overall dimensions shall be 23.4"" W x 38-1/2"" H x 22.3"" D. Weight capacity shall be 250 lbs. Tool-Free Quick-Mount™ system enables one-person installation. Useable depth shall be 20” and shall extend into the back pan 3.5”. Center section and back pan shall be 16-gauge steel, phosphate pre-treated and finished in a black textured powder coat. Rackrail shall be constructed of 11-gauge steel with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rackspaces. Rack shall be constructed to swing open for component cabling access, center section shall pivot for either left or right opening. Rack shall have a rear knockout panel with 1/2”, 3/4”, 1"", 1-1/2”, 2” and 3” electrical knockouts installed in base, and a rear knockout panel with 1/2”, 3/4”, 1”, 1-1/2”, 2” and 3” electrical knockouts, four Decora® cutouts, and BNC knockouts for UHF/VHF antennas installed in top. Large laser knockout on back pan shall have a 12-1/2” x 12-1/2” cutout for electrical pull-box. Fan knockouts on top and bottom shall allow for installation of up to four 4-1/2"" fans. Rack shall have 2” knockouts, 4” knockouts for Wiremold 4000® Series raceways, and knockouts for UCP Series universal connector panels on the side. Top, bottom and sides shall feature vertical vent pattern. DWR Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 140 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with DWRSR-ZL Latch. Rack shall be UL Listed in the US and Canada. Rack shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Rack shall comply with the requirements RoHS EU Directive 2002 / 95 / EC. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in materials or workmanship under normal use and conditions for the lifetime of the rack."

The compact DTRK Series provides a rackmounting solution for desktop installations and is also great for under-desk applications. Available options include vented and plexi front doors, and a brush grommet rear access panel for simple and clean cable entry routing.

The compact DTRK Series provides a rackmounting solution for desktop installations and is also great for under-desk applications. Available options include vented and plexi front doors, and a brush grommet rear access panel for simple and clean cable entry routing.

#NAME?

Save time and trouble aligning BGR series racks for ganging

Steel with black finish, plexi door with lock, can be hinged right or left