Showing 1460–1470 of 10070 results

Half-rack size flanged steel vent panel, black powder coat finish

Premium rack screws provide the best bit engagement in the industry. HG hardware features salt spray resistant plating that slows rust build-up. HG is truss-head hardware, 10-32 threaded, 3/4” long with pre-installed washers and self-guiding pilot points.

"Steel panel with ""D-rings"" on the front; black powder coatOrganize patch cords and maintain a required bend radius. Available in a wide variety of styles to suit any application. The D-Ring provides a creative solution for adding individual D-Rings to a rack or on a wall using appropriate fasteners. For optimal performance, do not exceed a 50% fill rate when passing cables through cable rings. Constructed from 16-gauge steel, and finished in a durable black powder coat."

Flexible mounting with 4 controlled fan outlets

Bolt modules to them in any combination.

"EIA compliant 19” wall mount rack shall be Middle Atlantic Products model # DWR-18-17. Overall dimensions shall be 23.4"" W x 38-1/2"" H x 17.3"" D. Weight capacity shall be 250 lbs. Tool-Free Quick-Mount™ system enables one-person installation. Useable depth shall be 15” and shall extend into the back pan 3.5”. Center section and back pan shall be 16-gauge steel, phosphate pre-treated and finished in a black textured powder coat. Rackrail shall be constructed of 11-gauge steel with tapped 10-32 mounting holes in universal EIA spacing with black e-coat finish and marked rackspaces. Rack shall be constructed to swing open for component cabling access, center section shall pivot for either left or right opening. Rack shall have a rear knockout panel with 1/2”, 3/4”, 1"", 1-1/2”, 2” and 3” electrical knockouts installed in base, and a rear knockout panel with 1/2”, 3/4”, 1”, 1-1/2”, 2” and 3” electrical knockouts, four Decora® cutouts, and BNC knockouts for UHF/VHF antennas installed in top. Large laser knockout on back pan shall have a 12-1/2” x 12-1/2” cutout for electrical pull-box. Fan knockouts on top and bottom shall allow for installation of up to four 4-1/2"" fans. Rack shall have 2” knockouts, 4” knockouts for Wiremold 4000® Series raceways, and knockouts for UCP Series universal connector panels on the side. Top, bottom and sides shall feature vertical vent pattern. DWR Series enclosures shall satisfy the 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic Design Category (SDC) “D” with lateral force requirements for protecting 140 lbs. of essential equipment in locations with the highest level of seismicity and top floor or rooftop installations with an Importance factor (Ip) of 1.5 when used with DWRSR-ZL Latch. Rack shall be UL Listed in the US and Canada. Rack shall be GREENGUARD Indoor Air Quality Certified for Children and Schools. Rack shall comply with the requirements RoHS EU Directive 2002 / 95 / EC. Rack shall be manufactured by an ISO 9001 and ISO 14001 registered company. Rack shall be warrantied to be free from defects in materials or workmanship under normal use and conditions for the lifetime of the rack."

Offered in solid configurations. Beveled corners provide a stylish modern appearance while hinging either left or right. Black textured powder coat finish. Includes keylock.

Solid Front Door, Fits 28 Inch Wide, 40 Space SR Series Racks, Black Finish

EVT Series vent panels provide an economical solution with a vertical slotted design. The EVTA series has a black and brushed anodized finish.

"Middle Atlantic Products ERK Rear Rail Kits 18 space. Type: Rack rail, Product color: Black, Housing material: Steel. Width: 1.41"" (35.7 mm), Depth: 1.38"" (35 mm), Height: 31.5"" (800.1 mm). Quantity per pack: 1 pc(s)"