Showing 0–10 of 114 results

Rally Mic Pod Extension Cable adds 10 meters of additional reach to the cabling of Rally Mic Pod or Rally Mic Pod Hub, and is plenum-rated and Eca/IEC 60332-1-2 compliant for commercial installation in walls, above ceilings, through raceways, and within standard 19mm conduit.When used with Rally Bar and Rally Bar Mini, two cables can connect for a total extension of 20 meters. In rooms with Rally or Rally Plus, connect Rally Mic Pod Extension Cable directly to the table hub to accommodate larger tables. A built-in cable clip keeps connections tight and secure.

Wall Mount for Video Bars saves space and clears the credenza by mounting Rally Bar or Rally Bar Mini to a wall or mobile cart. With an industry-standard VESA mounting pattern (200 x 50mm), Wall Mount is equally at home on mobile carts for ultimate versatility. A 10° video bar tilt down adapter is included to ensure an optimal angle for higher mounting positions. Whether mounted above the display or below, the Wall Mount works with your video bar’s built-in cable retention cover so cables can run up or down the wall and stay securely connected.

USE YOUR OWN CABLE AT YOUR DESIRED LENGTH. IT’S THAT EASY.When deploying Rally Mic Pods and Mic Pod Hubs, you may find yourself needing a little more cable, or a lot more cable. Easily extend the connection by using the Rally Mic Pod CAT Coupler to connect to a standard CAT cable.

The Kensington A1010 Telescoping Desk Stand is a professional desktop mount optimised for microphones, webcams and lighting systems - the perfect accessory for keeping your video conferencing setup organised and professional. The adjustable height stand accommodates different setup needs, the non-skid base prevents slipping, with a cable management clip supporting a tidy workspace. The A1010 is part of Kensington’s Professional Video Conferencing ecosystem - a powerfully cohesive plug & play software and accessory experience that empowers you to spend more time collaborating and less time troubleshooting.A versatile desktop mounting solution for microphones, webcams and lighting systems (3/8” screw mount with 1/4” and 5/8” adapters included).Extends from 11.8” to 19” to accommodate different webcam, microphone and lighting configurations.Keeps unsightly cords organised and out of your workspace - allowing for a clean and tidy video conferencing setup.A wide, non-skid base keeps your stand and accessories stable during use.Create a tailored Professional Video Conferencing setup based on your environment by combining with other accessories, such as a Webcam (W2000) or Ring Light (L1000).Meets MIL-STD-810H Method 504.3 Contamination by Fluids with disinfectants with no degradation.* *No visual degradation or inability to use as directed upon test completionConnect with confidence knowing Kensington stands behind the A1010 with a 2-year warranty.

Intuitive Remote Control, for easy in-room operation. Access presets and PTZ-controls, adjust volume, and more, all without leaving your seat.

Lens cap for Rally Bar

Riser Mount for Logitech TapElevated table mount with swivel and cable management for Logitech Tap and Tap IP meeting room touch controllers.LOGITECH TAP RISER MOUNTDesigned for conference room tables with center-located grommet holes, the Riser Mount secures the touch controller in place and elevates the display angle to 30° for better visibility and easier operation while seated. Tap Riser Mount maintains a clean tabletop by routing cables through the grommet hole, and swivels 180° for convenient operation from both sides of the table.RAISED PROFILE FOR AN EASIER REACHElevates the touch controller to a 30° display angle and swivels 180° for easier operation when reaching a center-of-table mounting location.Fits Most TablesAdjusts to tables up to 50mm in thickness, and through grommet holes from 51 - 89mm in diameter.INTEGRATED CABLE MANAGEMENTSupports down-routing of cables through the grommet hole for a clean appearance.

Designed to conserve table space in huddle rooms and for stand-up operation in hallways and open areas, the Logitech Tap Wall Mount offers convenient access to touch controls. A magnetic cable dock neatly holds an HDMI cable for wired content sharing. Compatibility with Tap’s rear and bottom cable exits supports cable routing either within or down the wall. Tap's integrated strain relief and retention mechanisms keep connections tight.

Barco R9861581 wireless presentation system accessory Black 1 pc(s)

HTC Vive Base Stations Tracker Black