Showing 1320–1330 of 23275 results

The Wireless AC1200 Dual Band USB Adapter (DWA-182) delivers powerful wireless AC technology to your desktop or notebook computer.- Next Generation Wi-Fi AC Technology for Superior Wireless Performance- Dual Band Technology - 2.4GHz (up to 300Mbps) or 5GHz (up to 867Mbps)- Backward compatible with 802.11n- USB Extension Cradle for optimal positioning and use- Draft IEEE 802.11ac, 802.11n, 802.11g and 802.11a Compliant- Access Secure Networks using WPA™ or WPA2™- Wi-Fi Protected Setup™ (WPS) Push Button for Easy Connection to a Wireless Network.

The SRW12USNEMA SmartRack 12U NEMA 12 Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in harsh, dirty work environments with limited floor space, such as factories, construction areas, utility plants, power stations, transportation terminals, distribution hubs and warehouses. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 90 kgs (200 lbs.) The SRW12USNEMA has a NEMA 12 (IP54) protection rating, protecting sensitive equipment against dirt, dust, lint, oil, drips and splashes. Its built-in air filter, louvered vents on the front door and side panels, sealed gasket around the door frames and brush strips around cable access points prevent dripping water, oil and airborne contaminants from getting inside. You can replace the air filter with standard, off-the-shelf furnace filters. Four high-performance intake fans built into the front door pull filtered air through the cabinet to keep your equipment cool. The cabinet swings away from the wall on a sturdy hinge, allowing easy back-door access to equipment and cabling during installation and maintenance. The reversible doors can open left or right. The doors and side panels lock securely to help prevent damage, tampering or theft. Convenient ports on the back door allow easy cable routing. The SRW12USNEMA comes fully assembled and ready to mount to the wall. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to house equipment up to 20.5 inches deep, such as network switches and patch panels.- Maximum load capacity of 90 kg (200 lb)- NEMA 12 (IP54) rating against dirt, dust, drips and splashes- Swings away from wall on hinge for easy back-door access- Locking steel cabinet with built-in ventilation fans- Secures 12U of 19 in. rack equipment up to 20.5 in. deep- Perfect for factories, construction areas, utility plants, power stations, transportation terminals, distribution hubs, warehouses and other harsh, dirty work environments where you need equipment to be secure, organized, out of the way and protected from environmental contaminants- Houses EIA-standard 19 in. rack equipment in 12U of space- Maximum load capacity of 90 kgs (200 lbs) - Built-in air filter, louvered vents and sealing door gaskets keep out dirt, dust, lint, oil, drips and splashes - Removable air filter can be replaced with standard, off-the-shelf furnace filters- Built-in high-performance door fans plug into standard NEMA 5-15R outlet (1.83 m (6-ft.) power cord included)- Sealed cable ports maintain dust and moisture resistance- Hinged Cabinet for Convenient Access: Swings away from the wall to allow easy back-door access to equipment and cabling during installation and maintenance - Reversible doors can open left or right to accommodate various rack configurations - Side panels and doors lock securely to help prevent damage, tampering or theft - Vented panels and built-in fans provide generous airflow to keep equipment cool - Convenient ports with removable covers and protective brush strips allow cable routing through rear door- Ships fully assembled for quick installation- Mounts to wall or rolls on floor with Tripp Lite’s optional SRCASTER caster kit - Wall-mounting holes spaced 16 in. apart for standard wall stud placement - Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 20.5 in. deep, such as network switches and patch panels- Rails adjust easily—unscrew them, slide them to desired depth, and screw them back in- Rails support square-hole or threaded-hole mounting - Rack spaces numbered for easy reference- Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance

This SmartRack® 12U Mid-Depth Rack Enclosure Cabinet is designed to simplify rack equipment installations and rack equipment maintenance. Compatible with all standard 19-inch rack equipment, it features front and rear pairs of vertical rails with square mounting holes. The rails are adjustable in quarter-inch increments to accommodate equipment depths from three to 32.5 inches, ideal for standard server installation. The rails are capable of supporting up to 1,000 pounds (453.6 kilograms) of equipment. The top and bottom panels are provided with ports for cable routing, and are furnished with vents designed to help remove warm air from the enclosure and draw in cool air by convection. The panels also support installation of standard user-supplied case fans (SRFANWM, sold separately). With a locking reversible front/rear doors and locking removable side panels, the SR12UB provides for the safe, secure installation of all equipment. To simplify deployment, the SR12UB comes with an accessory caster kit so it can easily be maneuvered into the desired location, and then secured in place by adjusting the unit's levelers. It ships fully assembled for quick installation.

The ThinkCentre Tiny/Nano Monitor Clamp II is a uniquely designed accessory which secures Tiny or Nano devices onto selected ThinkVision monitors. This mounting device need combined with Tiny VESA Mount II ( 4XF0N03161) or Nano VESA Mount ( 4XF0V81630) for secure mounting functionality.The highly integrated and secured solution will allow you to create a lean working environment and a better user experience.

Axiom AX42666S19B/16G memory module 16 GB 1 x 16 GB DDR4 2666 MHz

The SRW9UDP SmartRack® 9U Low-Profile Switch-Depth-Plus Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds (90.7 kilograms).The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing.The SRW9UDP comes fully assembled and ready to mount to the wall, or use an optional SRCASTER rolling caster kit to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

Add 2 high-speed RS-232 serial ports to your low profile/small form factor computer with a PCI Express expansion slotThe PEX2S553LP low profile/half-height PCI Express Serial Card turns a PCI Express slot into two RS232 (DB9) serial connections.The card is constructed using a native single chip design that lets you harness the full capability offered by PCI Express (PCIe), while reducing the load applied to the CPU by as much as 48% over conventional bridge chip serial cards.The PCI Express RS232 Serial Adapter Card is compatible with a broad range of operating systems, including Windows®; and Linux Kernel 2.6.11 to 4.11.x, and ships with a low profile/half-height bracket installed but includes an optional full profile bracket that lets you add 2 serial ports to virtually any computer (regardless of the case form factor).This product is a replacement for our PEX2S552LP card.Backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

HPE Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28 OCP3 Internal Ethernet / Fiber 25000 Mbit/s

Run the most resource-demanding applications on two 4K 60Hz displays, using your Mac or PCThis high-performance Thunderbolt™ 3 adapter lets you add two 4K 60Hz HDMI monitors to your Windows® or Mac computer through a single Thunderbolt 3 port.The Thunderbolt video adapter is compatible with computer systems that support Thunderbolt 3, such as models of MacBook Pro, Dell™ Precision and Dell XPS. Thunderbolt 3 is a protocol that uses the USB-C™ connector, but your computer system must support Thunderbolt 3 in order for the adapter to function as expected. If you connect the adapter to a USB-C port that does not support Thunderbolt 3, the adapter will not function.Connect two UHD 4K displays to your computer at 60HzWith an unprecedented 40Gbps of throughput, Thunderbolt 3 enables you to achieve the previously impossible feat of using a single port on your laptop to output dual 4K resolution at 60Hz to two independent displays. This performance lets you run the most resource-demanding applications imaginable. You can output independent content to each display at resolutions of up to 4096 x 2160p (60Hz), which is perfect for editing 4K video or performing other Ultra HD tasks such as creating CAD drawings or reviewing medical imagery.Supports dual 4K displays to work more efficientlyFunctioning as an external 2-port graphics adapter with audio support, this is a compact and convenient alternative to a laptop dock when you don’t need full docking capability.With two UHD 4K displays, you can work more efficiently from your laptop, so you can accomplish more in the same amount of time. With each display delivering 4K performance, you can have four times the screen space compared to 1080p. Creative professionals can be more productive with the freedom to edit 4K video on one display while previewing raw video playback on the second 4K display.Won't drain system resourcesThis adapter helps to keep your system running at peak performance. Unlike USB external video solutions, Thunderbolt 3 lets you run Ultra HD 4K resolution at 60Hz on both displays without draining system resources.Because it’s backward compatible with your high-definition 1080p displays, this is a great accessory for home, office or other desktop workspace applications.The TB32HD24K60 is backed by a 2-year StarTech.com warranty and free lifetime technical support.Your computer’s Thunderbolt 3 ports might not function properly until you update one or more of the following on your computer:• BIOS• Thunderbolt firmware• Thunderbolt 3 controller drivers• Thunderbolt 3 softwareThe required updates will vary depending on your computer.For an up-to-date list of affected computers and instructions, visit http://thunderbolttechnology.net/updates. If your manufacturer isn’t listed on the Thunderbolt website, contact your manufacturer.Note: In order to connect to two displays at 4K 60Hz, your computer system must have a fully enabled Thunderbolt 3 port that supports up to 40Gbps or the host must support dual displays over Thunderbolt 3.The StarTech.com Advantage

Add seven USB 3.2 Gen 1 ports and two USB fast-charge ports to your computerThis 7-port USB 3.2 Gen 1 hub functions as a traditional data hub for your computer, as well as a two-port charging station for your mobile devices. Now you can easily add seven USB 3.2 Gen 1 ports and two 2.4A fast-charging ports to your MacBook, laptop or desktop. It’s the perfect addition to any home, office or hot-desk environment.Fast-charge your Android™, iPad and iPhoneTwo 2.4 amp dedicated charging ports (DCP) provide fast charging for your smartphones, tablets and other USB-charged devices. The charging ports are located on the top of the hub for quick and easy access.The charging and data ports work simultaneously, so you can conveniently fast-charge your mobile devices while still using your USB 3.2 Gen 1 devices. The hub will also charge devices even if your computer is disconnected, in sleep mode, or turned off.Expand the connectivity of your computerIncrease your productivity by adding seven USB 3.2 Gen 1 (also known as USB 3.1 Gen 1, or USB 3.0) ports to your workstation. With support for data transfer rates up to 5Gbps, the hub is perfect for connecting high-bandwidth devices such as external hard drives, printers, scanners, high-resolution webcams, video cameras, and more.Designed for easy useThis USB 3.2 Gen 1 hub is the ideal accessory for your laptop or desktop computer. Its small footprint takes up little space on your desktop, and there’s plenty of room between each USB port, making it easy to plug and unplug the devices you use most often. Plus, you can set the hub up in seconds, with no driver installation required.The ST93007U2C is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage